What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 18.06.2025 02:21

Because the load is inductive, the current lags the voltage.(by a bit).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
How do you feel about the impending end of what Donald Trump calls "the Green New scam"?
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
In schematic diagrams this is the symbol for a fuse:
What is it like to date a women 20 years younger than yourself?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Barnstars:
What is your secret to glowing skin?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
There are two important concepts here.
[old diagram got deleted by accident]
Are there any real-life examples of prisoners who escaped from hospitals and were never caught?
Edit 2024–10.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
What are some reasons why men may not want to date a woman who can pay her own bills?
It seems Mohan does not understand the difference between a comment and an Answer.
A fuse is a non-resetable over current circuit protector.
I post the exact comment here.
How do you know how physically attractive you actually are?
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This one hit behind the barn.
It also is a device that limits the change in current flow.
Can I know a love story of a medical student?
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–16 [ OO OLAOYE OYEBODE ]
Here is a simplified AC power diagram.
What would be the lowest score with 9 strikes and no gutter balls?
a photo is worth a thousand words.
There are three different concepts here that are getting confused.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What is the reason for The Acolyte (2024 series) having poor reception among Star Wars fans?
At least they know the answer if they wanted it.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
What is the XXX XXX Keerna Kappor video?
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
what exactly is a ‘surge’ protector?
Now when you have a certain ac resistance, then a current flows in a loop.
but this device (an Inductor) … impedes the rapid changes in the current.
so, what happens?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Why is Jack Smith arguing that presidents should not have full immunities as Trump is requesting?
[image of Common-mode choke]
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
What is something you want to "get off your chest"?
The bolt then partially travels down the line to your home.
But it can get overloaded, and no longer works.
These are simplified answers to the original question, and does not change anything I wrote above.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–14 [Omar Gharbi Omar Gharbi ]
eight
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–10[John johnson John Johnson ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
He then describes Rainy Season and Lightning.
What does a fuse do?
He then asserts :
This is where the MOV conducts again, and dissipated the energy.
But… the neutral is now “floating” because of the 1 ohm resistance.
the problem then depends on "how fast does the fuse operate?".
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
A circuit breaker is similar, but is resettable.
An AC voltage/ current source, and an ac inductive load.
nine
but I think this circuit , shows a few more pieces.
One
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
First Sentence:
The other is “what does a “fuse” do?”
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
The third is lightning and “how it gets conducted into a home.”
Upvotes:
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This device then solves the entire problem.
At one ohm, the resistor has a maximum of 1 watt power.
These devices are installed between the “hot” and “neutral” and protective ground.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
What is lightning?
One is “what exactly is in a ‘surge protector’ ? ”
(Dc diagram shown, AC is similar).
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is where this question deviates from being a 'generic' question, and becomes more specific.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
He then describes the function of a fuse.
For this case there are devices called Metal oxide varistors (MOV).